FX Airguns

This FX Impact and FX Crown Gen 1 regulator by Huma-Air is specially designed as a "one on one" replacement regulator for your FX Impact and FX crown.

Unfortunately the fixed limited space in the FX Impact and FX Crown action was not sufficient for our standard Huma-Air Regulator design, so we had to comply our design to the ratio's used by FX.
Never the less we have accomplished to make a great replacement regulator what will solve the know issues of the factory regulator.

This is the Gen1 model what is compatible with factory models with 14 mm long pistons and 8 mm bellevilles disk springs.
(It will also be compatible with 95% of the Impact and Crown models with the 16 mm long piston and 8 mm belleville springs)

So what can you expect of the Huma-Air FX Impact or FX Crown Gen1 Regulator:

The output performance of the Huma Impact regulator won't be very different compared to a good functioning FX factory regulator, but we have some other benefits available:

The recovery time in between shots is much faster compared to the factory regulator.

This Huma-Air FX impact or Crown regulator can be adjusted higher in pressure from the outside while the rifle is under pressure.

Equal as the factory reg, if you want to lower the pressure, the rifle needs to be de-pressurized first otherwise the valve get damaged.
By using another type of material for the valve and piston, there is no way you can damage the piston because of faulty pressure adjustments.
We also supply some extra valves, so in case you adjust the pressure to the wrong side, and you damage the valve, it can be replaced without any extra costs.
 

Pressure settings

The design of the regulator makes it posible for setting it exactly to your wishes while placed in you FX impact by watching the output pressure gauge on you rifle.

We have three pressure ranges for the FX Impact or FX Crown regulator available:
The High Pressure range, 80-150 Bar, what will suit all calibers within the normal FAC range.
The Extra High Pressure range, 145-190 Bar, when you want to have extreme settings. Please note: raising the pressure above the factory set pressure is on your own risk!

The Low Pressure range, 50-90 Bar, specially for sub 12 ft/lbs models.

Please note: you need to do the stacking of the belleville springs on the piston yourself according to the manual, because we do not want to risk them to fall off the piston during shipping.

When you order your FX Impact or FX Crown regulator you will receive:

• Your regulator with the belleville springs, matching the pressure range you choose.
• A set of spare valve disks
• We will also include a “Huma-Air regulated” breech sticker
• Fitting instruction as pdf download

Huma-Air Quality Control

Huma-Air regulator's are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy.

Kwaliteit uit eigen land. Kies voor de HUMA regulator!

This FX Impact or FX Crown Gen2 regulator by Huma-Air is specially designed as a "one on one" replacement regulator for your FX Impact , FX Impact X  or FX crown.

Unfortunately the fixed limited space in the FX Impact and Crown action was not sufficient for our standard Huma-Air Regulator design, so we had to comply our design to the ratio's used by FX.
Never the less we have accomplished to make a great replacement regulator what will solve the know issues of the factory regulator.

This is the Gen2 model what is compatible with factory models with 16 mm long pistons and 8 mm bellevilles disk springs.

So what can you expect of the Huma-Air FX Impact or FX Crown Tuning Regulator:

The output performance of the Huma-Air Impact or Crown regulator won't be very different compared to a good functioning FX factory regulator, but we have some other benefits available
The recovery time in between shots is much faster compared to the factory regulator.
This Huma-Air FX regulator can be adjusted higher in pressure from the outside while the rifle is under pressure.
Equal as the factory reg, if you want to lower the pressure, the rifle needs to be de-pressurized first otherwise the valve get damaged.
By using another type of material for the valve and piston, there is no way you can damage the piston because of faulty pressure adjustments.
We also supply some extra valves, so in case you adjust the pressure to the wrong side, and you damage the valve, it can be replaced without any extra costs.
 

Pressure settings

The design of the regulator makes it posible for setting it exactly to your wishes while placed in you FX impact or Crown by watching the output pressure gauge on you rifle.

We have three pressure ranges for the FX Impact or Crown regulator available:
The High Pressure range, 80-150 Bar, what will suit all calibers within the normal FAC range.
The Extra High Pressure range, 145-190 Bar, when you want to have extreme settings. Please note: raising the pressure above the factory set pressure is on your own risk!
The Low Pressure range, 50-90 Bar, specially for sub 12 ft/lbs models.

Please note: you need to do the stacking of the belleville springs on the piston yourself according to the manual, because we do not want to risk them to fall off the piston during shipping.

When you order your FX Impact  or FX Crown regulator you will receive:

• Your regulator with the belleville springs, matching the pressure range you choose.
• A set of spare valve disks
• We will also include a “Huma-Air regulated” breech sticker
• Fitting instruction as pdf download

Huma-Air Quality Control

Huma-Air regulator's are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy.

Kwaliteit uit eigen land. Kies voor de HUMA regulator!

Deze First Regulator Bypass van Saber Tactical voor de FX Impact M3 vervangt de eerste regulator van de M3 en voorziet daarmee het plenum sneller van luchtdruk voor een volgend schot. Dit is erg handig voor het schieten met zware slugs over lange afstanden, en voorkomt vermindering van energie en verplaatsing van het punt van inslaan.

De Saber Tactical FX Impact M3 First Regulator Bypass werkt met oude en nieuwe ventielen van FX persluchtflessen, en is gemaakt van roestvast staal.
 

Huma-Air FX Bobcat Tuning Pressure Regulator
This FX Bobcat tuning regulator made by Huma is specially designed as a "one on one" replacement regulator for the FX Bobcat airrifle.
It can be placed into the action within a minute without any modification.

Due to the clear pressure scale it is fully adjustable over the complete pressure range of 100-150 bar. The FX Bobcat regulator for the .30 with 150 bar output will give about 270 m/s speed with 44,75 gn pellets, which is 78 ft/lbs - 105 J of power.
If you would like higher pressure settings, an Extra High Pressure model is available up to 170 bar output range for the .30

The FX Bobcat Regulator made by Huma is very consistent over the total range and solves all the known issues of the original regulator. It is made of high grade aircraft aluminium in combination with bronze components.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations.
• A constant pellet speed over the full working pressure range.
• Maximum use of the air volume due to our ultra compact build.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
The regulator is CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen. Als u een custom power setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.
 

Huma-Air FX Boss Tuning Regulator
This FX Boss regulator made by Huma is specially designed as a "one on one" replacement regulator for the FX Boss airrifle.
It can be placed into the action within a minute without any modification.

Due to the clear pressure scale it is fully adjustable over the complete pressure range of 100-150 bar. The FX Boss regulator for the .30 with 150 bar output will give about 270 m/s speed with 44,75 gn pellets, which is 78 ft/lbs - 105 J of power.
If you would like higher pressure settings, an Extra High Pressure model is available up to 170 bar output range for the .30

The FX Boss Regulator made by Huma is very consistent over the total range and solves all the known issues of the original regulator. It is made of high grade aircraft aluminium in combination with bronze components.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations.
• A constant pellet speed over the full working pressure range.
• Maximum use of the air volume due to our ultra compact build.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
The regulator is CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen. Als u een custom power setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.
 

Huma-Air FX Gladiator MKII Tuning Pressure Regulator
This FX Gladiator MKII tuning regulator made by Huma is specially designed as a "one on one" replacement regulator for the FX Gladiator MKII airrifle. It can be placed into the action within a minute without any modification.

Due to the clear pressure scale it is fully adjustable over the complete pressure range of 100-150 bar. The FX Gladiator MKII regulator for the .30 with 150 bar output will give about 270 m/s speed with 44,75 gn pellets, which is 78 ft/lbs - 105 J of power.
If you would like higher pressure settings, an Extra High Pressure model is available up to 170 bar output range for the .30

The FX Gladiator MKII Regulator made by Huma is very consistent over the total range and solves all the known issues of the original regulator. It is made of high grade aircraft aluminium in combination with bronze components.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations.
• A constant pellet speed over the full working pressure range.
• Maximum use of the air volume due to our ultra compact build.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
The regulator is CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen. Als u een custom power setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.
 

Huma-Air FX Impact Tuning Regulator
This FX Impact regulator by Huma-Air is specially designed as a "one on one" replacement regulator for your FX Impact, FX Impact X  or FX crown. It is compatible with factory regulators that use 8 mm diameter belleville springs, produced untill 03 - 2018

Unfortunately the fixed limited space in the FX Impact action was not sufficient for our standard Huma-Air Regulator design, so we had to comply our design to the ratio's used by FX. Never the less we have accomplished to make a great replacement regulator that will solve the known issues of the factory regulator.

What can you expect of the Huma-Air FX Impact Regulator:

• The recovery time in between shots is much faster compared to the factory regulator.
• This Huma FX impact regulator can be adjusted higher in pressure from the outside while the rifle is under pressure.
• Equal as the factory reg, if you want to lower the pressure, the rifle needs to be de-pressurized first otherwise the valve gets damaged.
• By using another type of material for the valve and piston, there is no way you can damage the piston because of faulty pressure adjustments.
• We also supply some extra valves, so in case you adjust the pressure to the wrong side, and you damage the valve, it can be replaced without any extra costs.

Pressure settings
The design of the regulator makes it posible for setting it exactly to your wishes while placed in your FX impact by watching the output pressure gauge on you rifle. We have three pressure ranges for the FX Impact regulator available:

• The High Pressure range, 80-150 Bar. This will suit all calibers within the normal FAC range.
• The Extra High Pressure range, 145-190 Bar. When you want to have extreme settings. Please note: raising the pressure above the factory set pressure is on your own risk!
• The Low Pressure range, 50-90 Bar. Especially for sub 12 ft/lbs models.

Please note: you need to do the stacking of the belleville springs on the piston yourself according to the manual, because we do not want to risk them to fall off the piston during transport.

Huma-Air Quality Control
Huma-Air regulator's are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy.

* Gelieve hieronder aan te geven welke power setting u wilt. 

Huma-Air FX Royale Tuning Pressure Regulator
This FX Royale tuning regulator made by Huma is specially designed as a "one on one" replacement regulator for the FX Royale airrifle.
It can be placed into the action within a minute without any modification.

Due to the clear pressure scale it is fully adjustable over the complete pressure range of 100-150 bar. The FX Royale regulator for the .30 with 150 bar output will give about 270 m/s speed with 44,75 gn pellets, which is 78 ft/lbs - 105 J of power. If you would like higher pressure settings, an Extra High Pressure model is available up to 170 bar output range for the .30

The FX Royale Regulator made by Huma is very consistent over the total range and solves all the known issues of the original regulator. It is made of high grade aircraft aluminium in combination with bronze components.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations.
• A constant pellet speed over the full working pressure range.
• Maximum use of the air volume due to our ultra compact build.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
The regulator is CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen. Als u een custom power setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.
 

Huma-Air FX FX Streamline Tuning Regulator
This Huma tuning regulator is specially designed as a "one on one" replacement regulator for the FX Streamline airrifle. It can be placed into the pressure tube within a minute. The regulator is very consistent over the total pressure range of the pressure tube and solves all the known issues of the original regulator. Vented to the atmosfere for the best performance.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• Maximum use of the air volume due to our ultra compact build.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage.

Pressure settings
Your FX Streamline regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester.

Huma-Air Quality Control
Huma regulator's are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in. 

FX Wildcat MKII Tuning Regulator
This FX Wildcat MKII (MK2) tuning regulator made by Huma is specially designed as a "one on one" replacement for the factory regulator. It can be placed into the pressure tube within a minute and replaces the original regulator. The Huma FX Wildcat regulator is very consistent over the total pressure range of the pressure tube and solves all the known issues of the original regulator. Made of high grade aircraft aluminium in combination with bronze components.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• Maximum use of the air volume due to our ultra compact build.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage.

Pressure settings
Your FX Wildcat regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester.

Huma-Air Quality Control
Huma regulator's are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in. 

FX Wildcat MKII Tuning Regulator
This FX Wildcat tuning regulator made by Huma is specially designed as a "one on one" replacement for the factory regulator.
It can be placed into the pressure tube within a minute and replaces the original regulator. The Huma FX Wildcat regulator is very consistent over the total pressure range of the pressure tube and solves all the known issues of the original regulator. Made of high grade aircraft aluminium in combination with bronze components

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• Maximum use of the air volume due to our ultra compact build.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage.

Pressure settings
Your FX Wildcat regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester.

Huma-Air Quality Control
Huma regulator's are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.