EDgun

Edgun Leshiy tuning regulator

Huma-Air owner: 'Ed(uart) did it again with a fantastic little airrifle, The Edgun Leshiy. You Love it or Hate it, but I Love it for sure!
It has a great design, very good build quality, excellent shooting....what else do you want?
Well, I do like it to give my rifle a personal touch, and it happens to be, I know a bit about regulators :)
Not like the Edgun reg is no good, in the contrary, but we have our own specialism and we have managed to squeeze just a bit more out of this little Goblin.'

So we made an Edgun Leshiy tuning regulator.
This regulator replaces the original leshiy regulator and is an “one on one” replacement. Just depressurize the pressure tube and unscrew it, remove the original regulator and replace it for the Huma regulator and you are finished.

The benefits

• Easy to adjust due to the clear pressure scale, so need of a regulator tester. 
• This regulator comes in our middle pressure range to cover all calibers (ca 75-150 bar)
• Up to 15-20% more shots with equal power because of the ultra compact build (tested in .25)
• Excellent consistency.
• Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.

If you want to do some more tuning; the Huma Leshiy regulator has a clear pressure scale so you can easily adjust it to your wishes.
These regulators are also vented to the atmosphere without any modification to your pressure tube needed, so no creeping up in power.

Quality Control
The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Als u een custom setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Edgun Lelya Tuning Regulator
For the Edgun Lelya airrifle we have a special Huma tuning regulator available what will boost your rifle's shot capacities to the max.
Due to our ultra compact build and special modified plenum (not displayed) you can get a huge number of extra shots.
This regulator is also vented to the atmosphere without any modifications to the gun and replaces the original Edgun Lelya regulator.
Just depressurize the pressure tube and unscrew the original regulator from his plenum and place the new plenum + the Huma regulator and you are finished.

The benefits

• Easy to adjust and finetune due to the pressure scale. 
• Due to our ultra compact build and modified plenum volume you will get a huge increase in shotcount.
• (Veles tested: 18 shots with original setting, 32 shots with Huma regulator fitted in .177).
• This regulator comes in the standart middle pressure range (MP: 70-150 bar output) covering sub 12 ft/lbs and FAC models.
• Excellent consistency.
• Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.

Pressure settings
If you want to do some more tuning; the regulator has a clear pressure scale so you can easy adjust it to your wishes.

Huma-Air Quality Control
Huma regulator's are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Als u een custom setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Edgun Leshiy regulator + tune kit for 12 ft/lbs.
Made on special request for the HFT and UK shooters. Huma Air in close coöperation with Airborne Arms NZ, developed this tune kit for the Edgun Leshiy to convert your rifle into a 12 ft/lbs (16 Joule) HFT version with an enormous shotcount.
Our kit contains our micro regulator, a special plenum with a matching valve return spring, a power sleeve and a new, softer hammerspring.
The kit is specially designed for .177 but also works fine for .22 and it is capable of providing you a huge shotcount with the highest shot to shot consistency. (see the shotstrings in the pictures) 

The benefits

• Huge increase in shotcount.
• Easy to adjust due to the pressure scale, you do not need to gues, or use a reg-tester to set the pressure.
• This regulator comes in our special low pressure range of 60-120 bar.
• Excellent consistency.
• Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.
• Tested in .177 and .22. (no test data for .25 available yet).
• (Maximum power for this model is tested @ 21 ft/lbs in .22).

• Your regulator preset on to your own wishes.
• A pressure scale in Bar on the regulator, for fine-tuning or re-adjustment.
• A delrin powersleave.
• A new valve return spring.
• A new hammer spring.
• We will include a “Huma regulated” breech sticker.

Huma-Air Edgun Morana Tuning Regulator
For the Edgun Morana we have designed a replacement Huma Tuning Regulator complete with a volume plenum.
Due to our ultra compact build of our regulator you can remove the large factory regulator body and replace it with our regulator and volume plenum. The extra regulated volume that is created allows you to achieve the same pellet velocity with a lower regulator setpoint; so smoother shooting behaviour and more shots available.

The benefits

• Easy to adjust due to the pressure scale, so you can do all the fine tuning yourself.
• Achieve the same pellet velocity with less regulator pressure.
• The ultra compact build will give you more regulated volume.
• Excellent consistency.
• Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.
• This regulator has a wide pressure range to cover all calibers.

It is pre-set on most common setting, and it has a clear pressure scale so you can easy adjust it to your wishes.
These regulators are vented to the atmosphere without any modification to your pressure tube needed so no creeping up in power.

We will put in a breech sticker “Huma regulated” what you can put on your rifle.

Huma-Air Quality Control
The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Als u een custom setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Edgun Lelya 2.0 Power Tune Regulator
For the new Edgun Lelya 2.0 there is a regulator power tune kit avaiable. This set allows you to gain maximum power out of your Lelya with lower regulator pressure. The tuning set replaces the complete original regulator and regulator body and is an “one on one” replacement. You can unscrew the original regulator house from the Edgun valve house and replace it with the complete power plenum with regulator.

The benefits

• Easy adjustable regulator due to the pressure scale, so you can do all the fine tuning yourself.
• This regulator has a wide pressure range to cover all calibers.
• A XXL power volume plenum what will provide you the right cappacity of regulated air volume.
• The ultra compact build of the regulator will give you even more regulated volume.
• Excellent consistency.
• Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.

These regulators are vented to the atmosphere without any modification to your pressure tube needed, so no creeping up in power.
We will put in a breech sticker “Huma regulated” what you can put on your rifle.

Huma-Air Quality Control
Huma regulator's are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Als u een custom setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Edgun Matador R5M Power Tune Regulator
For the New 2018 Edgun R5M there is a regulator power tune kit avaiable. This set allows you to gain maximum power out of your R5M with lower regulator pressure. This tuning set replaces the complete original regulator and regulator body and is an “one on one” replacement. You can unscrew the original regulator house from the Edgun valve house and replace it with the complete power plenum with regulator.

The benefits

• Easy adjustable regulator due to the pressure scale, so you can do all the fine tuning yourself.
• This regulator has a wide pressure range to cover all calibers.
• A XXL power volume plenum what will provide you the right cappacity of regulated air volume.
• The ultra compact build of the regulator will give you even more regulated volume.
• Excellent consistency.
• Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.

These regulators are vented to the atmosphere without any modification to your pressure tube needed, so no creeping up in power.
We will put in a breech sticker “Huma regulated” what you can put on your rifle.

Huma-Air Quality Control
Huma regulator's are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Als u een custom setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Edgun Matador R5 or R5M tuning regulator
For the New 2018 Edgun R5 and R5M there is a regulator power tune kit avaiable. This set allows you to gain maximum power out of your R5 or R5M with lower regulator pressure. This tuning set replaces the complete original regulator and regulator body and is an “one on one” replacement. You can unscrew the original regulator house from the Edgun valve house and replace it with the complete power plenum with regulator.

The benefits

• Easy adjustable regulator due to the pressure scale, so you can do all the fine tuning yourself.
• This regulator has a wide pressure range to cover all calibers.
• A XXL power volume plenum what will provide you the right cappacity of regulated air volume.
• The ultra compact build of the regulator will give you even more regulated volume.
• Excellent consistency.
• Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.

These regulators are vented to the atmosphere without any modification to your pressure tube needed, so no creeping up in power.
We will put in a breech sticker “Huma regulated” what you can put on your rifle.

Huma-Air Quality Control
Huma regulator's are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Als u een custom setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Edgun Matador R3 and R3M power tune set
For the Edgun Matador R3 and R3M we have designed a power tune upgrade with XXL volume plenum, Huma tuning regulator and a special designed massive bronze hammer upgrade. This set allows you to gain maximum power out of your Matador.

This tuning set replaces the complete original regulator and regulator body and is a “one on one” replacement.
You can unscrew the original regulator house from the Edgun valve house and replace it with the complete power plenum with regulator.
(This model will fit until early 2017 models. You can check if your reg diameter is equal to the regulator plenum). The hammerkit can be fitted to the original rifle's hammer. Due to the small build of the Matador valve stem we strongly advice you not to exceed 140 bar maximum output pressure.

The benefits

• Easy adjustable regulator due to the pressure scale, so you can do all the fine tuning yourself.
• This regulator has a wide pressure range to cover all calibers.
• A XXL power volume plenum what will provide you the right cappacity of regulated air volume.
• The ultra compact build of the regulator will give you even more regulated volume.
• Excellent consistency.
• Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.

These regulators are vented to the atmosphere without any modification to your pressure tube needed, so no creeping up in power.
We will put in a breech sticker “Huma regulated” what you can put on your rifle.

Huma-Air Quality Control
Huma regulator's are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Als u een custom setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

EDgun Matador R3 or R3M tuning regulator
For the Edgun Matador R3 and R3M we have designed a replacement Huma Tuning Regulator complete with a XL volume plenum.
Due to our ultra compact build of our regulator you can remove the large factory regulator body and replace it with our regulator and volume plenum. The extra regulated volume that is created allows you to achieve the same pellet velocity with a lower regulator setpoint; so smoother shooting behaviour and more shots available.

Our regulator + plenum replaces the original regulator and is a “one on one” replacement. Just unscrew the factory regulator and regulator body and replaces it with the Huma regulator set and you are finished.
This model will fit until early 2017 models. Please check if your reg matches the picture here above.
(If you are looking for an extra power tune also, please check our Edgun Matador R3 and R3M power tune set that also includes an extra brass hammerweight)

The benefits

• Easy to adjust due to the pressure scale, so you can do all the fine tuning yourself.
• Achieve the same pellet velocity with less regulator pressure.
• This regulator has a wide pressure range to cover all calibers.
• The ultra compact build will give you more regulated volume.
• Excellent consistency.
• Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.

It is pre-set on most common setting, and it has a clear pressure scale so you can easy adjust it to your wishes.
These regulators are vented to the atmosphere without any modification to your pressure tube needed so no creeping up in power.

We will put in a breech sticker “Huma regulated” that you can put on your rifle.

Quality Control
Huma regulators are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Als u een custom setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.