Air Arms

Air Arms EV2 tuning regulator
This unique regulator is specially designed as a "one on one" replacement regulator for the Air Arms EV2. It will improve concistany and solves all the known issues of the original regulator instandly. It can be screwed into the action within a minute. The regulator is vented to the atmosphere, so no creeping up in power in long term.

The benefits of the Huma-Air regulator for Air Arms EV2

• Up to 165 shot on one fill !
• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• No more creeping or other issues!

Pressure settings of the Air Arms EV2 regulator
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Designed for a wide pressure range (60-110 bar) to suit sub 12 ft/lbs - 16 Joule power perfectly. (When you use this regulator on the EV2, the pressure gauge of the rifle will be disabled. If you absolutely want a pressure gauge on your EV2 you can consider placing a FTP900 gauge on your cylinder)

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Air Arms FTP900 tuning regulator
This unique regulator is specially designed as a "one on one" replacement regulator for the Air Arms Pro Target, EV2 and FTP900. It will improve concistany and solves all the known issues of the original regulator instandly.
It can be screwed into the action within a minute. Made of high grade aircraft aluminium in combination with bronze.
The regulator is vented to the atmosphere, so no creeping up in power in long term.

The benefits of the Huma-Air regulator for Air Arms FTP900

• Up to 165 shot on one fill !
• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• No more creeping or other issues!  

Pressure settings of the Air Arms FTP900 regulator
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Designed for a wide pressure range (60-110 bar) to suit sub 12 ft/lbs - 16 Joule power perfectly. (When you use this regulator on a EV2, the pressure gauge of the rifle will be disabled. If you absolutely want a pressure gauge on your EV2 you can consider placing a FTP900 gauge on your cylinder)

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference. 

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Tuning pressure regulator specially for the Air Arms HFT 500 target rifle
Brings your rifle's performance to a higher level. The regulator is vented to the atmosphere for excellent regulating behavior and no creeping up in power on the long term. It has a seperate volume bus (plenum) matching the caliber and preferred power. The regbody is only 16 mm long and the regulator neck is round 13 mm with a length of 15 mm. So there is almost no lose of air volume in the pressure tube. A simple modification to your air rifle what will result in excellent shooting behavior and very consistent pelletspeed.

The benefits of the Huma-Air regulator for your Air Arms HFT500

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage 

Pressure settings of the Air Arms regulator
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.Our advice for choosing the best pressure range for your Huma-Air regulator:

• Low pressure range:        60-110 bar for 16 Joule / 12 ft/lbs models.
• Medium pressure range:  70-150 bar for all FAC rifles from 1.77, .22 and .25.
• High pressure range:       100-170 bar for .25 extra heavy pellets >25 grain

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

Air Arms Pro Target tuning regulator
This unique regulator is specially designed as a "one on one" replacement regulator for the Air Arms Pro Target, EV2 and FTP900. It will improve concistany and solves all the known issues of the original regulator instandly. It can be screwed into the action within a minute. Made of high grade aircraft aluminium in combination with bronze. The regulator is vented to the atmosphere, so no creeping up in power in long term.

The benefits of the Huma regulator for Air Arms Pro Target:

• Up to 165 shot on one fill!
• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• No more creeping or other issues!

Pressure settings of the Air Arms Pro Target regulator
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Designed for a wide pressure range (60-110 bar) to suit sub 12 ft/lbs - 16 Joule power perfectly. (When you use this regulator on a EV2, the pressure gauge of the rifle will be disabled. If you absolutely want a pressure gauge on your EV2 you can consider placing a FTP900 gauge on your cylinder)

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

External Air Arms S200 tuning regulator
The Huma-Air regulator will regulate the airpressure in your S200 airgun. It reduces the primary high fill pressure in the cylinder into a  lower pre-set working pressure. This will give you a constant pelletspeed and a higher accuracy; no more compensation on the (H)FT lane! The installation of the S200 regulator is very simple. Unscrew your air cylinder, screw the regulator between firing valve body and pressure tube and you are ready*
It is vented to the atmosphere, so no creeping up in power during time,  without the need of a breath hole in the cylinder.
A simple modification to your air rifle what will result in excellent shooting behavior and very consistent pelletspeed.

The benefits of this Air Arms S200 tuning regulator over other regulators currently on the market

• The regulator housing is made of extremely tough 42Cr steel
• Tested for a working pressure of at least 3x the working pressure of the rifle, for everyone’s safety
• A constant pellet speed over the full working pressure range
• Because the regbody comes between tube and valve you will get 45 mm. extra airvolume
• The regulator body and the housing are one piece, so no chance of the regulator moving inside the cylinder
• The one piece body and regulator housing also reduces the possibility of leaks
• DIY fitting is a real option for the most people
• High quality bluing in the same matte color as the original pressure tube
• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• It will give you a better shotcount and a full flat shotstring immediately
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.

Pressure settings of the Air Arms S200 regulator
The S200 regulator comes preset at the most common pressure setting, or we will adjust it according to your personal wishes. The pressure range is adjustable from 70-150 bar. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes. After fitting the regulator, always check the powersetting of the rifle and finetune it when needed to stay within legal limits.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen.

Huma-Air regulator for the Air Arms S200 airrifle. 
The Huma-Air tuning regulator will regulate the airpressure in your S200 airgun. It reduces the primary high fill pressure in the cylinder into a  lower pre-set working pressure. This will give you a constant pelletspeed and a higher accuracy. The design volume is based on the 16 Joule version but it can been set higher if preffered. The installation of the regulator is very simple. The regulator is placed inside the pressure tube of the rifle and you are ready. It is vented to the atmosphere, without the need of a breath hole in the cylinder, so no creeping up in power during time.

The benefits of the Huma-Air regulator for your Air Arms S200

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage

Pressure settings of the Air Arms S200 regulator
The S200 regulator comes preset at the most common pressure setting, or we will adjust it according to your personal wishes. The pressure range is adjustable from 70-150 bar. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes. After fitting the regulator, always check the powersetting of the rifle and finetune it when needed to stay within legal limits.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen.

Huma-Air pressure regulator specially for the Air Arms S400 rifle
Brings your rifle's performance to a higher level. The regulator is vented to the atmosphere for excellent regulating behavior and no creeping up in power on the long term. We include a seperate volume bus (plenum) matching the caliber and preferred power.
The regbody is only 16 mm long and the regulator neck is round 13 mm with a length of 15 mm. So there is almost no lose of air volume in the pressure tube. A simple modification to your air rifle what will result in excellent shooting behavior and very consistent pelletspeed.

The benefits of the Huma-Air regulator for your Air Arms S400

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage

Pressure settings of the Air Arms regulator
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Our advice for choosing the best pressure range for your Huma-Air regulator:

• Low pressure range:        60-110 bar for 16 Joule / 12 ft/lbs models.
• Medium pressure range:  70-150 bar for all FAC rifles from 1.77, .22 and .25.
• High pressure range:       100-170 bar for .25 extra heavy pellets >25 grain

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen.

Air Arms S410 tuning regulator
Designed for placing inside the pressure tube. There are two o-rings on the regulator body who seals inside the tube wall. The regulator is vented to the atmosphere for excellent regulating behavior and no creeping up in power on the long term. The regulator has a seperate volume bus (plenum) matching the caliber and chosen pressure range. The regbody is only 16 mm long with a very small neck. This ultra compact build makes sure there is almost no lose of air volume in the pressure tube. A simple modification to your air rifle what will result in excellent shooting behavior and very consistent pelletspeed.

The benefits of the Huma-Air regulator for your Air Arms S410

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage 

Pressure settings of the Air Arms regulator
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Our advice for choosing the best pressure range for your Huma regulator:

• Low pressure range:        60-110 bar for 16 Joule / 12 ft/lbs models.
• Medium pressure range:  70-150 bar for all FAC rifles from 1.77, .22 and .25.
• High pressure range:       100-170 bar for .25 extra heavy pellets >25 grain

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen.

Air Arms S500 tuning regulator
Designed for placing inside the pressure tube. There are two o-rings on the regulator body who seals inside the tube wall. The regulator is vented to the atmosphere for excellent regulating behavior and no creeping up in power on the long term. The regulator has a seperate volume bus (plenum) matching the caliber and chosen pressure range. The regbody is only 16 mm long with a very small neck. This ultra compact build makes sure there is almost no lose of air volume in the pressure tube. A simple modification to your air rifle what will result in excellent shooting behavior and very consistent pelletspeed.

The benefits of the Huma-Air regulator for your Air Arms S500

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage 

Pressure settings of the Air Arms S500 regulator
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Our advice for choosing the best pressure range for your Huma regulator:

• Low pressure range:        60-110 bar for 16 Joule / 12 ft/lbs models.
• Medium pressure range:  70-150 bar for all FAC rifles from 1.77, .22 and .25.
• High pressure range:       100-170 bar for .25 extra heavy pellets >25 grain

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen.

Huma-Air Air Arms S510 regulator
Designed for placing inside the pressure tube. There are two o-rings on the regulator body who seals inside the tube wall. The regulator is vented to the atmosphere for excellent regulating behavior and no creeping up in power on the long term. The regulator has a seperate volume bus (plenum) matching the caliber and chosen pressure range. The regbody is only 16 mm long with a very small neck. This ultra compact build makes sure there is almost no lose of air volume in the pressure tube. A simple modification to your air rifle what will result in excellent shooting behavior and very consistent pelletspeed.

The benefits of the Huma-Air regulator for your Air Arms S510

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage 

Pressure settings of the Air Arms regulator 
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Our advice for choosing the best pressure range for your Huma regulator:

• Low pressure range:        60-110 bar for 16 Joule / 12 ft/lbs models.
• Medium pressure range:  70-150 bar for all FAC rifles from 1.77, .22 and .25.
• High pressure range:       100-170 bar for .25 extra heavy pellets >25 grain

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen.

Huma-Air Air Arms Superlite pressure regulator
Brings your rifle's performance to a higher level. The regulator is vented to the atmosphere for excellent regulating behavior and no creeping up in power on the long term. We include a seperate volume bus (plenum) matching the caliber and preferred power.
The regbody is only 16 mm long and the regulator neck is round 13 mm with a length of 15 mm. So there is almost no lose of air volume in the pressure tube. A simple modification to your air rifle what will result in excellent shooting behavior and very consistent pelletspeed.

The benefits of the Huma-Air regulator for your Air Arms Superlite

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage

Pressure settings of the Air Arms regulator
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes. Our advice for choosing the best pressure range for your Huma regulator:

• Low pressure range:        60-110 bar for 16 Joule / 12 ft/lbs models.
• Medium pressure range:  70-150 bar for all FAC rifles from 1.77, .22 and .25.
• High pressure range:       100-170 bar for .25 extra heavy pellets >25 grain

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld.