Evanix

Huma-Air Evanix (tactical) Sniper (K) Tuning Regulator

Huma-Air Evanix (tactical) Sniper (K) Tuning Regulator
For the Evanix Sniper (K) airguns we have a regulator that can be pushed into the pressure tube.
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power. After fitting the regulator your rifle's pressure gauge will indicate the regulated pressure.

* This model regulator is only suitable for rifle's with pressure tube, not suitable for bottled rifles.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage 

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen. Als u een custom power setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Edgun Matador R3M Tuning Regulator

For the Edgun Lelya airrifle we have a special Huma tuning regulator available what will boost your rifle's shot capacities to the max.
Due to our ultra compact build and special modified plenum (not displayed) you can get a huge number of extra shots.

This regulator is also vented to the atmosphere without any modifications to the gun and replaces the original Edgun Lelya regulator.
Just depressurize the pressure tube and unscrew the original regulator from his plenum and place the new plenum + the Huma regulator and you are finished.

The benefits are:

- Easy to adjust and finetune due to the pressure scale. 
- Due to our ultra compact build and modified plenum volume you will get a huge increase in shotcount
- (Veles tested: 18 shots with original setting, 32 shots with Huma regulator fitted in .177)
- This regulator comes in the standart middle pressure range (MP: 70-150 bar output) covering sub 12 ft/lbs and FAC models.
- Excellent consistency
- Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations

Pressure settings

If you want to do some more tuning; the regulator has a clear pressure scale so you can easy adjust it to your wishes.
These regulators are also vented to the atmosphere so no creeping up in power.


Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

Huma-Air Evanix Blizzard S10 Tuning Regulator

For the Edgun Lelya airrifle we have a special Huma tuning regulator available what will boost your rifle's shot capacities to the max.
Due to our ultra compact build and special modified plenum (not displayed) you can get a huge number of extra shots.

This regulator is also vented to the atmosphere without any modifications to the gun and replaces the original Edgun Lelya regulator.
Just depressurize the pressure tube and unscrew the original regulator from his plenum and place the new plenum + the Huma regulator and you are finished.

The benefits are:

- Easy to adjust and finetune due to the pressure scale. 
- Due to our ultra compact build and modified plenum volume you will get a huge increase in shotcount
- (Veles tested: 18 shots with original setting, 32 shots with Huma regulator fitted in .177)
- This regulator comes in the standart middle pressure range (MP: 70-150 bar output) covering sub 12 ft/lbs and FAC models.
- Excellent consistency
- Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations

Pressure settings

If you want to do some more tuning; the regulator has a clear pressure scale so you can easy adjust it to your wishes.
These regulators are also vented to the atmosphere so no creeping up in power.


Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.