Regulator accessoires

Foster BF adapter male - 

or the Benjamin Maximus we have made a unique pressure regulator for excelent shooting

The regulator can be used with the original pressure gauge assembly, keeping the gauge in his place. But it is also possible to remove the pressure gauge and gauge assembly completely and replace it with the regulator body, so you have even more air volume available in the pressure tube.
If you use the pressure gauge, it will display the regulated pressure of your pistol.
 

These regulators are vented to the atmosphere without any modification to your pressure tube needed. So no drilling in the tube and also no creeping up in power.

The benefits:

Higher accuracy of your airrifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
Maxiumum use of the air volume due to our ultra compact build.
It will give you a better shotcount and a full flat shotstring immediately.
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage 


When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
• We will include a “Huma regulated” breech sticker;
• Fitting instructions as pdf download

Pressure settings

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.


Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

Sealkit HUMA regulator - (model zelf aangeven bij opmerking veld)

Sealkit HUMA regulator - (model zelf aangeven bij opmerking veld)

This regulator tester device  is specially designed to test and service our Huma-Air regulators for BSA,  Air Arms S200 and CZ200.  With this model you can test the Huma-Air models below:

• Air Arms S200 external regulator
• Air Arms S200 internal regulator
• BSA Scorpion external regulator
• BSA Ultra MMC external regulator
• BSA Ultra SE regulator
• BSA Scorpion SE regulator
• BSA Internal regulator
• CZ200 external regulator
• CZ200 internal regulator

Check the proper working and cycling, adjust the regulator after a full rebuild or just experiment to find out the best pressure setting of your rifle.
The tester is suitable for a wide range of Huma-Air regulators (see list above) and has a easy to use depressurize screw. It has a large 63 mm oil filled pressure gauge with clear scale in PSI and Bar.
After depresurizing your rifle totally, you can unscrew the pressure tube + regulator from the valve body of the rifle and screw the regulator tester directly into the pressure tube. Then you can presurize your pressure tube again and check the regulator output pressure, the regulator cylce etc by simulating shots by using the de-presurize screw. The input pressure is suitable for 232 bar.

For high durability we have used a combination of anodizided aircraft aluminum for the body and a bronze depresurize screw.

Sealkit HUMA regulator - (model zelf aangeven bij opmerking veld)

Sealkit HUMA regulator - (model zelf aangeven bij opmerking veld)

Foster BF adapter male - 

O-ring set vulnippel FX & Hatsan

Betreft 4 O-ringen.