Manometers

Deze FX Digitale Manometer geeft niet alleen een heldere, eenduidige weergave van de druk in uw cilinder, maar biedt daarnaast nog een heel scala aan extra informatie.

De functies van de FX Digitale Manometer omvatten:

• Schotteller
• Lifetime schotteller
• Digitale luchtdrukweergave
• Luchtverbruik

De Angled Manometer Bracket voor de FX Impact M3 zorgt ervoor dat u de regulator constant in de gaten kunt houden, door middel van deze bracket kunt u de manometer haaks op het wapen monteren, zodat u de waarden te allen tijde af kunt lezen.

FX heeft alle benodige o-ringen en schroeven meegeleverd met de Angled Manometer Bracket voor de Impact M3, ook werkt hij in combinatie met de standaard en digitale manometers.
 

or the Benjamin Maximus we have made a unique pressure regulator for excelent shooting

The regulator can be used with the original pressure gauge assembly, keeping the gauge in his place. But it is also possible to remove the pressure gauge and gauge assembly completely and replace it with the regulator body, so you have even more air volume available in the pressure tube.
If you use the pressure gauge, it will display the regulated pressure of your pistol.
 

These regulators are vented to the atmosphere without any modification to your pressure tube needed. So no drilling in the tube and also no creeping up in power.

The benefits:

Higher accuracy of your airrifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
Maxiumum use of the air volume due to our ultra compact build.
It will give you a better shotcount and a full flat shotstring immediately.
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage 


When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
• We will include a “Huma regulated” breech sticker;
• Fitting instructions as pdf download

Pressure settings

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.


Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

or the Benjamin Maximus we have made a unique pressure regulator for excelent shooting

The regulator can be used with the original pressure gauge assembly, keeping the gauge in his place. But it is also possible to remove the pressure gauge and gauge assembly completely and replace it with the regulator body, so you have even more air volume available in the pressure tube.
If you use the pressure gauge, it will display the regulated pressure of your pistol.
 

These regulators are vented to the atmosphere without any modification to your pressure tube needed. So no drilling in the tube and also no creeping up in power.

The benefits:

Higher accuracy of your airrifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
Maxiumum use of the air volume due to our ultra compact build.
It will give you a better shotcount and a full flat shotstring immediately.
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage 


When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
• We will include a “Huma regulated” breech sticker;
• Fitting instructions as pdf download

Pressure settings

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.


Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

or the Benjamin Maximus we have made a unique pressure regulator for excelent shooting

The regulator can be used with the original pressure gauge assembly, keeping the gauge in his place. But it is also possible to remove the pressure gauge and gauge assembly completely and replace it with the regulator body, so you have even more air volume available in the pressure tube.
If you use the pressure gauge, it will display the regulated pressure of your pistol.
 

These regulators are vented to the atmosphere without any modification to your pressure tube needed. So no drilling in the tube and also no creeping up in power.

The benefits:

Higher accuracy of your airrifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
Maxiumum use of the air volume due to our ultra compact build.
It will give you a better shotcount and a full flat shotstring immediately.
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage 


When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
• We will include a “Huma regulated” breech sticker;
• Fitting instructions as pdf download

Pressure settings

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.


Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

or the Benjamin Maximus we have made a unique pressure regulator for excelent shooting

The regulator can be used with the original pressure gauge assembly, keeping the gauge in his place. But it is also possible to remove the pressure gauge and gauge assembly completely and replace it with the regulator body, so you have even more air volume available in the pressure tube.
If you use the pressure gauge, it will display the regulated pressure of your pistol.
 

These regulators are vented to the atmosphere without any modification to your pressure tube needed. So no drilling in the tube and also no creeping up in power.

The benefits:

Higher accuracy of your airrifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
Maxiumum use of the air volume due to our ultra compact build.
It will give you a better shotcount and a full flat shotstring immediately.
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage 


When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
• We will include a “Huma regulated” breech sticker;
• Fitting instructions as pdf download

Pressure settings

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.


Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

or the Benjamin Maximus we have made a unique pressure regulator for excelent shooting

The regulator can be used with the original pressure gauge assembly, keeping the gauge in his place. But it is also possible to remove the pressure gauge and gauge assembly completely and replace it with the regulator body, so you have even more air volume available in the pressure tube.
If you use the pressure gauge, it will display the regulated pressure of your pistol.
 

These regulators are vented to the atmosphere without any modification to your pressure tube needed. So no drilling in the tube and also no creeping up in power.

The benefits:

Higher accuracy of your airrifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
Maxiumum use of the air volume due to our ultra compact build.
It will give you a better shotcount and a full flat shotstring immediately.
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage 


When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
• We will include a “Huma regulated” breech sticker;
• Fitting instructions as pdf download

Pressure settings

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.


Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

or the Benjamin Maximus we have made a unique pressure regulator for excelent shooting

The regulator can be used with the original pressure gauge assembly, keeping the gauge in his place. But it is also possible to remove the pressure gauge and gauge assembly completely and replace it with the regulator body, so you have even more air volume available in the pressure tube.
If you use the pressure gauge, it will display the regulated pressure of your pistol.
 

These regulators are vented to the atmosphere without any modification to your pressure tube needed. So no drilling in the tube and also no creeping up in power.

The benefits:

Higher accuracy of your airrifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
Maxiumum use of the air volume due to our ultra compact build.
It will give you a better shotcount and a full flat shotstring immediately.
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage 


When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
• We will include a “Huma regulated” breech sticker;
• Fitting instructions as pdf download

Pressure settings

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.


Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.