Huma-Air Gamo Phox Tuning Regulator

For the new Gamo Coyote we have designed a pressure regulator that can be pushed into the pressure tube.
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power.

The benefits:

Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
It will give you a better shotcount and a full flat shotstring immediately.
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage 


When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
• We will include a “Huma regulated” breech sticker;
• Fitting instructions as pdf download

 
Pressure settings

Caliber .177 and .22 regulators come in the standart middle pressure range (MP: 70-150 bar output) covering sub 12 ft/lbs and FAC models.
Caliber .25 regulators are fitted with a larger plenum and a higher pressure setup (HP: 110-170 bar output)
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.


Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

 

 


Before ordering a regulator:
Please make sure, you have made yourself familiar with the fitting instructions on our website, you are happy to carry out the necessary work and you are able to adjust your power to keep your rifle legal.
Gamo/BSA pressure tubes can be rough inside. Please make sure your pressure tube is smooth and free of scraches, if not, please remove the scratches and polish the inner wall before installing the regulator for proper sealing of the regulator o-rings.