Huma-Air BSA Loopmantel met geïntegreerde demper

Huma-Air Shroud with integrated moderator.  (Previously sold as "Huub Shrouds")

These shrouds will fit any of the BSA multi-shot PCP rifles with a straight front breech. (not suitable for S10 and some of the very early low breech single shot rifles)

Not only do they look good but they also work very well at quietening down the muzzle report of BSA PCP air rifles. When the baffles have been fitted in the best configuration, the shrouds are as quiet or quieter than most off the shelf silencers/moderators. For the maximum performance in quieting your rifle the shrouds are made caliber specific.

They are made out of 27mm OD aluminum tube to keep the weight down, then sand blasted and powder coated matt black, which gives them a nice textured non-shiny finish. The fitting is directly on the barrel and the fitting screws are covered by the shroud when it is screwed on. The shrouds are made to be around 140mm (5.5") longer than the end of your barrel. The longer they are the more internal volume there is, which translates to a quieter muzzle report.

Please be aware that the shroud is a little higher than the top of the scope rail, so check your scope rings before you assemble the shroud.

We deliver the 3 most popular lengths for BSAs: 

• the 12" barrel model (R-10 Super Carbine and Ultra), they are around 15" (380mm) long overall,
• the 15" model (standard R-10 and Scorpion), they are around 18" (465mm) long overall,
• the 18.5" model (standard on the FAC/Export Scorpion and FAC/Export R-10), they are around 21.75" (550mm) long overall.

They are supplied with the shroud tube, barrel adaptor, back-flow bush, baffles, steel wired curlers, and sound reducting felt.

* Gelieve hieronder aan te geven voor welke loop u de geluiddemper wilt bestellen. Zou u tevens in het opmerkingen veld willen aangeven voor welk geweer de demper is en wat de looplengte is. U komt dit veld vanzelf tegen als u verder gaat met bestellen.