Dempers

Met 108 mm houdt hij de lengte van het wapen relatief kort. Demontage vereist geen gereedschap, de Tatsu laat zich zo uit elkaar draaien. Deze DonnyFL geluiddemper is geschikt voor alle luchtwapens met een 1/2 UNF- aansluiting. De DonnyFL Koi heeft vilt dempingsmateriaal en is mat geanodiseerd.

 

Een geluiddemper die zich door de gegroefde buitenkant makkelijk laat monteren en die zonder gereedschap uit elkaar te halen is. De DonnyFL Koi heeft vilt dempingsmateriaal en is mat geanodiseerd. Alle Vulcan-modellen met een M14x1.25 aansluiting zijn geschikt voor deze DonnyFL Ronin.
 

Huma-Air Shroud with integrated moderator.  (Previously sold as "Huub Shrouds")

These shrouds will fit any of the BSA multi-shot PCP rifles with a straight front breech. (not suitable for S10 and some of the very early low breech single shot rifles)

Not only do they look good but they also work very well at quietening down the muzzle report of BSA PCP air rifles. When the baffles have been fitted in the best configuration, the shrouds are as quiet or quieter than most off the shelf silencers/moderators. For the maximum performance in quieting your rifle the shrouds are made caliber specific.

They are made out of 27mm OD aluminum tube to keep the weight down, then sand blasted and powder coated matt black, which gives them a nice textured non-shiny finish. The fitting is directly on the barrel and the fitting screws are covered by the shroud when it is screwed on. The shrouds are made to be around 140mm (5.5") longer than the end of your barrel. The longer they are the more internal volume there is, which translates to a quieter muzzle report.

Please be aware that the shroud is a little higher than the top of the scope rail, so check your scope rings before you assemble the shroud.

We deliver the 3 most popular lengths for BSAs: 

• the 12" barrel model (R-10 Super Carbine and Ultra), they are around 15" (380mm) long overall,
• the 15" model (standard R-10 and Scorpion), they are around 18" (465mm) long overall,
• the 18.5" model (standard on the FAC/Export Scorpion and FAC/Export R-10), they are around 21.75" (550mm) long overall.

They are supplied with the shroud tube, barrel adaptor, back-flow bush, baffles, steel wired curlers, and sound reducting felt.

* Gelieve hieronder aan te geven voor welke loop u de geluiddemper wilt bestellen. Zou u tevens in het opmerkingen veld willen aangeven voor welk geweer de demper is en wat de looplengte is. U komt dit veld vanzelf tegen als u verder gaat met bestellen.

Aditional 20 mm long volume chamber for the modular Airgun Silencer MOD30

Specifications:

Aditional 40 mm long volume chamber for the modular Airgun Silencer MOD30

Specifications:

Modular Airgun Silencer, MOD30-1/2 pre-assembled with 1x40 mm and 2 x 20 modules (Mini)

This silencer, or moderator, consists of a start chamber with fixed female 1/2UNFx20, or M20x1 treads (used on several FX models) and two 20 mm long volume chambers and an endcap.
The first chamber is filled with a wired metal insert wrapped with our special Kevlar ® enforced ballistic fibers to minimize the sound. The two 20 mm modules are hollow volume expansion chamber with fixed baffles.
This modular system allows you to configure your own silencer or moderator in term of lenght, caliber, volume chamber size and content of the internal silencer chambers.

Optionally you can add or remove volume chambers with different length, volume and internals.
By mixing these variables you can influence the frequency and output decibels of your moderator and adjust them perfectly matching your rifle.

The benefits of the Huma-Air Modulair Airgun Silencer Mini:

• The possibility to make the modular silencer rifle specific, will allow you to reduce the output noice to an absolute minimum.
• The precision machined volume chambers are screwed into each other making it very easy to switch or change the setup.
• You can ad or remove 40 mm or 20 mm long volume chambers to the setup.
• The internal parts of the 40 mm chambers consist of a metal wired sleeve with Kevlar (aramid) enforced ballistic fibers around it to reduce the sound.
• You can also choose to use maximum volume, without the standard inserts in the volume chambers.
• The system is caliber specific in a combined .177 /.22 version and a .25 model. Of course you can use a .25 model also for .22 and .177.

Specifications:

Originele Air Arms demper met snelwisselschroef. Met de schroef/draaiknop kan je de demper aandraaien op de loop Geschikt voor oa de AA S400 met 10 mm loop. 

Geschikt / passend op alle lopen met 10 mm buitendiameter.