Dempers

Prachtige kwaliteit en een gelikt ontwerp van Hugget. 

Huggett geluiddempers zijn CNC-gefabriceerd van hoogwaardig aluminium en hebben een zeer solide binnenwerk. Het ontwerp is uiterst effectief, goede en stille dempers. De Belita is een zeer compact model en heeft 1/2 UNF binnendraad.

Geschikt voor kalibers:

4.5 mm / .177, 5.5 mm / .22

OF

6.35 mm / .25.

Deze Hatsan geluidsdemper is specifiek ontwikkeld voor de Hatsan PCP luchtgeweren. De demper heeft een 1/2" UNF schroefdraad en wordt automatisch gecentreerd zodat hij altijd perfect gepositioneerd staat.

De demper past op de 4,5, 5,5 en 6,35 mm kalibers .

Model: Belita
Length: 120mm
Diameter: 31mm
Weight: 97g
ft/lbs: ≤12

The Belita sits between the Mini and the Snipe, 50mm shorter than the Snipe with only a 2db difference — great results for its size. Useful for confined spaces and/or when overall length is a concern. Can handle much higher power levels if connected with an active silencer shroud.

Modular Airgun Silencer, MOD30-4 pre-assembled with 4 x 40mm. modules (Standard)

Let op, de 4,5 mm en de .22 zijn hetzelfde.

This silencer consists of a start chamber with fixed 1/2UNF treads, three extra 40mm long volume chambers and an endcap.
All these four chambers are filled with wired metal inserts wrapped with Kevlar (aramid) enforced ballistic fibers to minimize the sound. This system allows you to configure your own moderator or silencer in term of lenght, caliber, volume chamber size and content of the internal silencer chambers.

Optionally you can add or remove volume chambers with different length, volume and internals.
By mixing these variables you can influence the frequency and output decibels of your moderator and adjust them perfectly matching your rifle.

The benefits of the Huma-Air Modulair Airgun Silencer:

• The possibility to make the moderator rifle specific, will allow you to reduce the output noice to an absolute minimum.
• The precision machined volume chambers are screwed into each other making it very easy to switch or change the setup.
• You can ad or remove 40 mm or 20 mm long volume chambers to the setup.
• The internal parts of the 40 mm chambers consist of a metal wired sleeve with Kevlar (aramid) enforced ballistic fibers around it to reduce the sound.
• You can also choose to use maximum volume, without the standard inserts in the volume chambers.
• The system is caliber specific in a combined .177 /.22 version, a .25 model and a .30 model. Of course you can use a .25 model also for .22 and .177

Specifications: