Dempers

Prachtig design en een mooi compact formaat. Deze Huggett Atom 1/2 UNF geluiddemper is ondanks zijn compacte formaat (slechts 89 mm lang met een diameter van 31 mm), geschikt voor luchtgeweren met een kracht tot 16 Joule (12 ft/lbs).

De Huggett Atom 1/2 UNF geluiddemper is precisie gefreesd uit aluminium en het dempingsmateriaal is aangebracht rond een fijnmazig gaas dat het dempingsmateriaal een extra bescherming geeft. Werking geschiedt middels het absorptieprincipe.

Zowel productie als assemblage van de zeer net afgewerkte Huggett geluiddempers wordt in Engeland gedaan.

Prachtige kwaliteit en een gelikt ontwerp van Hugget. 

Huggett geluiddempers zijn CNC-gefabriceerd van hoogwaardig aluminium en hebben een zeer solide binnenwerk. Het ontwerp is uiterst effectief, goede en stille dempers. De Belita is een zeer compact model en heeft 1/2 UNF binnendraad.

Geschikt voor kalibers:

4.5 mm / .177, 5.5 mm / .22

OF

6.35 mm / .25.

Geluiddemper voor de modellen HW77. Let op! Past niet op de K versie!

Montage: Verwijder de korrel, schuif de demper op de loop, en schroef deze vast. Plaats vervolgens de korrel weer op de loop.

 Geschikt voor de volgende modellen:

• 
   HW 30 (s)
   HW 50 (s)
   HW 35
   HW 35 E

Montage: Verwijder de korrel, schuif de demper op de loop, en schroef deze vast. Plaats vervolgens de korrel weer op de loop.

 Geschikt voor de volgende modellen:

• HW 80
  HW 85
  HW 90
  HW 95

Deze Hatsan geluidsdemper is specifiek ontwikkeld voor de Hatsan PCP luchtgeweren. De demper heeft een 1/2" UNF schroefdraad en wordt automatisch gecentreerd zodat hij altijd perfect gepositioneerd staat.

De demper past op de 4,5, 5,5 en 6,35 mm kalibers .

Geschikt voor 4,5 en 5,5 mm buksen.

Model: Belita
Length: 120mm
Diameter: 31mm
Weight: 97g
 

The Belita sits between the Mini and the Snipe, 50mm shorter than the Snipe with only a 2db difference — great results for its size. Useful for confined spaces and/or when overall length is a concern. Can handle much higher power levels if connected with an active silencer shroud.

Modular Airgun Silencer or Moderator, MOD40-4/0 pre-assembled with 4x40 mm. modules (Standard)

1/2 UNF aansluiting / thread.

This silencer, or moderator, consists of a start chamber with fixed female treads (available in several sizes) three extra 40 mm long volume chambers and an endcap.
All these four chambers are filled with wired metal inserts wrapped with our special Kevlar ® enforced ballistic fibers to minimize the sound.
This system allows you to configure your own silencer in term of lenght, caliber, volume chamber size and content of the internal silencer chambers.

Optionally you can add or remove volume chambers with different length, volume and internals.
By mixing these variables you can influence the frequency and output decibels of your silencer and adjust them perfectly matching your rifle.

The benefits of the Huma-Air Modulair Airgun Silencer:
 

• The possibility to make the silencer rifle specific, will allow you to reduce the output noice to an absolute minimum.
• The precision machined volume chambers are screwed into each other making it very easy to switch or change the setup.
• You can ad or remove 40 mm or 20 mm long volume chambers to the setup.
• The internal parts of the 40 mm chambers consist of a metal wired sleeve with Kevlar (aramid) enforced ballistic fibers around it to reduce the sound.
• You can also choose to use maximum volume, without the standard inserts in the volume chambers.
• The system is caliber specific in a combined .177 /.22 version, a .25 and a .30 model. Of course you can use a .25 model also for .22 and .177 too.

Specifications:

Modular Airgun Silencer, MOD30-1/2 pre-assembled with 1x40 mm and 2 x 20 modules (Mini)

This silencer, or moderator, consists of a start chamber with fixed female 1/2UNFx20, or M20x1 treads (used on several FX models) and two 20 mm long volume chambers and an endcap.
The first chamber is filled with a wired metal insert wrapped with our special Kevlar ® enforced ballistic fibers to minimize the sound. The two 20 mm modules are hollow volume expansion chamber with fixed baffles.
This modular system allows you to configure your own silencer or moderator in term of lenght, caliber, volume chamber size and content of the internal silencer chambers.

Optionally you can add or remove volume chambers with different length, volume and internals.
By mixing these variables you can influence the frequency and output decibels of your moderator and adjust them perfectly matching your rifle.

The benefits of the Huma-Air Modulair Airgun Silencer Mini:

• The possibility to make the modular silencer rifle specific, will allow you to reduce the output noice to an absolute minimum.
• The precision machined volume chambers are screwed into each other making it very easy to switch or change the setup.
• You can ad or remove 40 mm or 20 mm long volume chambers to the setup.
• The internal parts of the 40 mm chambers consist of a metal wired sleeve with Kevlar (aramid) enforced ballistic fibers around it to reduce the sound.
• You can also choose to use maximum volume, without the standard inserts in the volume chambers.
• The system is caliber specific in a combined .177 /.22 version and a .25 model. Of course you can use a .25 model also for .22 and .177.

Specifications:

Aditional 20 mm long volume chamber for the modular Airgun Silencer MOD30

Specifications:

Aditional 40 mm long volume chamber for the modular Airgun Silencer MOD30

Specifications:

Huma-Air Shroud with integrated moderator.  (Previously sold as "Huub Shrouds")

These shrouds will fit any of the BSA multi-shot PCP rifles with a straight front breech. (not suitable for S10 and some of the very early low breech single shot rifles)

Not only do they look good but they also work very well at quietening down the muzzle report of BSA PCP air rifles. When the baffles have been fitted in the best configuration, the shrouds are as quiet or quieter than most off the shelf silencers/moderators. For the maximum performance in quieting your rifle the shrouds are made caliber specific.

They are made out of 27mm OD aluminum tube to keep the weight down, then sand blasted and powder coated matt black, which gives them a nice textured non-shiny finish. The fitting is directly on the barrel and the fitting screws are covered by the shroud when it is screwed on. The shrouds are made to be around 140mm (5.5") longer than the end of your barrel. The longer they are the more internal volume there is, which translates to a quieter muzzle report.

Please be aware that the shroud is a little higher than the top of the scope rail, so check your scope rings before you assemble the shroud.

We deliver the 3 most popular lengths for BSAs: 

• the 12" barrel model (R-10 Super Carbine and Ultra), they are around 15" (380mm) long overall,
• the 15" model (standard R-10 and Scorpion), they are around 18" (465mm) long overall,
• the 18.5" model (standard on the FAC/Export Scorpion and FAC/Export R-10), they are around 21.75" (550mm) long overall.

They are supplied with the shroud tube, barrel adaptor, back-flow bush, baffles, steel wired curlers, and sound reducting felt.

* Gelieve hieronder aan te geven voor welke loop u de geluiddemper wilt bestellen. Zou u tevens in het opmerkingen veld willen aangeven voor welk geweer de demper is en wat de looplengte is. U komt dit veld vanzelf tegen als u verder gaat met bestellen.