Air Arms

Our Huma pressure regulator specially for the Air Arms Superlite rifle; Brings your rifle's performance to a higher level
The regulator is vented to the atmosphere for excellent regulating behavior and no creeping up in power on the long term.

We include a seperate volume bus (plenum) matching the caliber and preferred power.
The regbody is only 16 mm long and the regulator neck is round 13 mm with a length of 15 mm. So there is almost no lose of air volume in the pressure tube.
A simple modification to your air rifle what will result in excellent shooting behavior and very consistent pelletspeed.
 

The benefits:

Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
It will give you a better shotcount and a full flat shotstring immediately.
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage 

Pressure settings

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
• We will include a “Huma regulated” breech sticker;
• Fitting instructions as pdf download

 
Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

F

or the Air Arms EV2,  Arm Arms FTP900 and Air Arms Pro-Target models  we designed a tuning regulator what replaces the original regulator.
This unique regulator is specially designed as a "one on one" replacement regulator for the Air Arms EV2, FTP900 and Pro-Target rifles. It will improve concistany and solves all the known issues of the original regulator instandly.
It can be screwed into the action within a minute. It fits EV2, FTP900 and Pro-target. Made of high grade aircraft aluminium in combination with bronze
The regulator is vented to the atmosphere, so no creeping up in power in long term.

 

The benefits:

Up to 165 shot on one fill !
Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
No more creeping or other issues!

Pressure settings

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Designed for a wide pressure range (60-110 bar) to suit sub 12 ft/lbs - 16 Joule power perfectly


When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• We will include a “Huma regulated” breech sticker;
• Fitting instructions as pdf download.

(When you use this regulator on the EV2, the pressure gauge of the rifle will be disabled. If you absolutely want a pressure gauge on your EV2 you can consider placing a TFP900 gauge on your cylinder)
 
Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

 

 


Before ordering a regulator:
Please make sure, you have made yourself familiar with the fitting instructions on our website, you are happy to carry out the necessary work and you are able to adjust your power to keep your rifle legal

F

or the Air Arms EV2,  Arm Arms FTP900 and Air Arms Pro-Target models  we designed a tuning regulator what replaces the original regulator.
This unique regulator is specially designed as a "one on one" replacement regulator for the Air Arms EV2, FTP900 and Pro-Target rifles. It will improve concistany and solves all the known issues of the original regulator instandly.
It can be screwed into the action within a minute. It fits EV2, FTP900 and Pro-target. Made of high grade aircraft aluminium in combination with bronze
The regulator is vented to the atmosphere, so no creeping up in power in long term.

 

The benefits:

Up to 165 shot on one fill !
Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
No more creeping or other issues!

Pressure settings

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Designed for a wide pressure range (60-110 bar) to suit sub 12 ft/lbs - 16 Joule power perfectly


When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• We will include a “Huma regulated” breech sticker;
• Fitting instructions as pdf download.

(When you use this regulator on the EV2, the pressure gauge of the rifle will be disabled. If you absolutely want a pressure gauge on your EV2 you can consider placing a TFP900 gauge on your cylinder)
 
Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

 

 


Before ordering a regulator:
Please make sure, you have made yourself familiar with the fitting instructions on our website, you are happy to carry out the necessary work and you are able to adjust your power to keep your rifle legal

F

or the Air Arms EV2,  Arm Arms FTP900 and Air Arms Pro-Target models  we designed a tuning regulator what replaces the original regulator.
This unique regulator is specially designed as a "one on one" replacement regulator for the Air Arms EV2, FTP900 and Pro-Target rifles. It will improve concistany and solves all the known issues of the original regulator instandly.
It can be screwed into the action within a minute. It fits EV2, FTP900 and Pro-target. Made of high grade aircraft aluminium in combination with bronze
The regulator is vented to the atmosphere, so no creeping up in power in long term.

 

The benefits:

Up to 165 shot on one fill !
Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
No more creeping or other issues!

Pressure settings

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Designed for a wide pressure range (60-110 bar) to suit sub 12 ft/lbs - 16 Joule power perfectly


When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• We will include a “Huma regulated” breech sticker;
• Fitting instructions as pdf download.

(When you use this regulator on the EV2, the pressure gauge of the rifle will be disabled. If you absolutely want a pressure gauge on your EV2 you can consider placing a TFP900 gauge on your cylinder)
 
Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

 

 


Before ordering a regulator:
Please make sure, you have made yourself familiar with the fitting instructions on our website, you are happy to carry out the necessary work and you are able to adjust your power to keep your rifle legal

This unique external regulator is specially made to fit the Air Arms S200 airrifle, or the CZ200 model with quickfill

The Huma regulator will regulate the airpressure in your S200 airgun. It reduces the primary high fill pressure in the cylinder into a  lower pre-set working pressure. This will give you a constant pelletspeed and a higher accuracy; no more compensation on the (H)FT lane!

The installation of the regulator is very simple. Unscrew your air cylinder, screw the regulator between firing valve body and pressure tube and you are ready*
It is vented to the atmosphere, so no creeping up in power during time,  without the need of a breath hole in the cylinder.
A simple modification to your air rifle what will result in excellent shooting behavior and very consistent pelletspeed.

The benefits of this regulator over other regulators currently on the market:

The regulator housing is made of extremely tough 42Cr steel,
Tested for a working pressure of at least 3x the working pressure of the rifle, for everyone’s safety,
It uses a long stroke piston that gives great consistency,
Because the regbody comes between tube and valve you will get 45 mm. extra airvolume.
The regulator body and the housing are one piece, so no chance of the regulator moving inside the cylinder,
The one piece body and regulator housing also reduces the possibility of leaks,
DIY fitting is a real option for the most people,
High quality bluing in the same matte color as the original pressure tube.
Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
It will give you a better shotcount and a full flat shotstring immediately.
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.

Due to his length this reg has a restricted airvolume, so this makes it specialy suitable for the 12 ft/lbs – 16 Joule versions. The maximum power of the reg is about 20 ft/lbs – 30 Joule.

Pressure settings

The regulator comes preset at the most common pressure setting, or we will adjust it according to your personal wishes. The pressure range is adjustable from 70-150 bar.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
After fitting the regulator, always check the powersetting of the rifle and finetune it when needed to stay within legal limits.

When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
• We will include a “Huma regulated” breech sticker;
• Fitting instructions as pdf download

 
Quality

The regulator is CNC produced out of high grade aircraft Aluminum, bronze and steel.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

This regulator is specially made to fit the Air Arms S200 airrifle, or the CZ200 model with quickfill
The Huma regulator will regulate the airpressure in your S200 airgun. It reduces the primary high fill pressure in the cylinder into a  lower pre-set working pressure. This will give you a constant pelletspeed and a higher accuracy.
The design volume is based on the 16 Joule version but it can been set higher if preffered.

The installation of the regulator is very simple. The regulator is placed inside the pressure tube of the rifle and you are ready.
It is vented to the atmosphere, without the need of a breath hole in the cylinder, so no creeping up in power during time,

The benefits:

Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
It will give you a better shotcount and a full flat shotstring immediately.
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage 

Pressure settings

The regulator comes preset at the most common pressure setting, or we will adjust it according to your personal wishes. The pressure range is adjustable from 70-150 bar.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
After fitting the regulator, always check the powersetting of the rifle and finetune it when needed to stay within legal limits.

When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
• We will include a “Huma regulated” breech sticker;
• Fitting instructions as pdf download

 
Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.